Відео

How to fix a judder whilst driving

Thank you for the video!

Il livello di rispetto e sostegno reciproci tra noi è davvero incoraggiante e dimostra il potere della sorellanza e della solidarietà.🍭

Why you have to remove battery cable

Too easy for me I give up😅

I don't want to take all that crap off, then you gotta put it all back and those fasteners are a pain

Hi is this the same for my ford grand cmax titanium diesel 1.6 2014 uk 🇬🇧 help shane

Just finished putting my driver's headlight an wow... So much to do just for one bulb... UNREAL

that sensor connector is the trickiest part, could do with an explainer there, please?

So, no bleeding the system?

Why couldn’t they have just made it a simple fuel filter swap like on my mk4 golf? 🤦‍♂️

Hello just want to ask because my tyre in the left rear wheel in wearing on the edge like its not center maybe you can help me which one have the problem

Ouf! I had such a hard time doing this. I ended up getting it done from above. I couldn't get it from underneath because I just couldn't move the tensioner back enough to give me enough play to get the belt around the last pulley. The tool I rented was too long and kept hitting other parts on the car thereby hindering it's full movement or my tools were too short and I couldn't get enough leverage while contorting my body to get that last pulley. I noticed that I could move then tensioner much further from above so I got everything sorted down below and then went above got the alternator last. Not going to lie, I was started to get a little worried at one point that I was going to have to have the car towed to a mechanic.

What sizes are those spanners 1:38

I’ve done this job several times and there is no way in hell you’re removing the rear seats for a starter.

Thank you

The crucial bit is missing - getting the bladdy cover off to get to the battery. One false move and you will snap the tabs.

I'm so confused where is the coolant draining out of??? He doesn't undo anything other than bleeder screw up top?

Taking off the air filter box is so much easier

What size socket and spanner ?

Video label says specifically 96 to 07, in video details say 08 to 16. My car is 07 Taurus. This is just plain silly

Didn't know there was a pin in the front, thank you for the video!

You call this a number manual and yet you skip all the details....pftt! No good!

Oh interesting. I purchased a no-spill funnel kit because I assumed that it was needed, but I gather from this video that the reservoir in a Ford Focus is basically a no-spill funnel?

What is the one on the front of the engine called? It looked the exact same and it has a hose going from it to the air intake. I’m getting oil coming out of that and getting sucked into the air box?

Which side was it? passenger side/driver side?

Terrible video, did not show how to put the belt on!

thanks

Hasent it got a engine cover underneath with stupid amount of bolts ???

Where can I get a Haynes car repair manual cheap

What does th fuel relay switch look like under the drivers seat

My wife cut some wires under the drivers seat now it will crank but not start

👍

Why didn’t you just go through where the tire is???

Is it the same die for a 2012 Ford Escape 4 cylinder?

Great video. Be aware of the incorrect torque specs @5:01 . Strut to steering knuckle is 103 ft-lbs.

I’d like to point out that the floor mat over the battery cover did NOT start off the video with a greasy footprint 😂

My 02 sensor on my motorcycle is wildly going from 120 to 900 and the mass air flow is twice what it should be the dealership over filled the oil and the engine is misfiring is it worth cleaning the 02 sensor or what else could it be ?

👍

This is nothing like my Lacrosse.

Thank you so much

Very good

Thank you! This was exactly how it was shown on the video!

Today I changed my other half’s and the handbrake cable which was replaced less than a year ago, feels stretched… After replacing the brakes / shoes / drums, we followed the bleeding process but for some reason the rear passenger side, has air escaping and I think the piston or hydraulic thing may have leaked. Does anyone know a remedy? I am having to borrow another car to drive with tonight for work, new front disc / pads but the rear was done today and it’s a little scary as the braking distance is far too much.

Very insightful visualization! As a freshly-made owner of Clio 3, appreciate your video 🤝🏻

again... doesnt share the bolt sizes, had the camera at wrong angle when pushing caliper piston back in...

Very poor video. Lacking much information.

Thank You, just what I was looking for.

Mine loses coolant out of the overflow on the header tank does it mean i have a air lock ?

👍